IOT BASED (BLYNK) DIGITAL TENSIMETER AND BEAT PER MINUTE

Era Sabila, Safira Fegi Nisrina

Abstract


In the current industrial era, developments in the electronic aspect are so advanced, for example in the health sector. Currently, there are many new medical devices that allow people to easily find out their health conditions, one of which is checking blood pressure and heart rate. Blood pressure and heart rate are one of the vital signs of humans. Blood pressure is the pressure exerted by the blood against the walls of the arteries. In measuring blood pressure there are two values used such as systolic (when the heart beats) and diastole (when the heart is relaxed). Heart rate usually refers to the amount of time the heart beats per unit time, generally represented as BPM (Beats Per Minute). The purpose of writing this Scientific Paper is to make an IoT-based digital tensimeter and bpm which aims to be able to easily measure blood pressure and heart rate that can be accessed from the internet. The IoT-Based Digital Tensimeter and BPM (Blynk) can measure blood pressure and heart rate (bpm) through the IoT system in the Blynk application on andrioid smartphones and LCDs properly. The device can read blood pressure with an accuracy of 99.58% systolic and 97.75% diastole. Then the BPM can read with an accuracy of 98.29%.

Keywords


Digital Tensimeter; BPM, Heart Rate; Blood Pressure

Full Text:

PDF

References


Afriansyah Yovi, Arifuddin Rahman and Novrianto Yusuf (2018) ‘Rancang Bangun Alat Pendeteksi Detak Jantung, Suhu Tubuh, dan Tensimeter Berbasis Arduino Uno serta Smartphone Android’, Seminar Nasional Fortei7-1 - Forum Pendidikan Tinggi Teknik Elektro Indonesia REgional VII, pp. 597–603.

Ahmad Nur Kholis Suhermanto, D. et al. (2023) ‘Rancang Bangun Kendali Adaptif Motor DC Berdasar Suhu Menggunakan Wemos D1 R1 dan LoRa 74 Rancang Bangun Kendali Adaptif Motor DC Berdasar Suhu Menggunakan Wemos D1 R1 Dan LoRa’, Jurnal Teknik Elektro - Universitas Negeri Surabaya, 12–2, pp. 74–83.

Amiruddin, M.A., Danes, V.R. and Lintong, F. (2015) ‘Analisa Hasil Pengukuran Tekanan Darah antara Posisi Duduk dan Posisi Berdiri pada Mahasiswa Semester VII (Tujuh) TA. 2014/2015 Fakultas Kedokteran Universitas Sam Ratulangi’, Jurnal e-Biomedik (eBm), 3(April), pp. 125–129.

Danindra Riski, M. (2019) ‘RANCANG ALAT LAMPU OTOMATIS DI CARGO COMPARTMENT PESAWAT BERBASIS ARDUINO MENGGUNAKAN PUSH BUTTON SWITCH SEBAGAI PEMBELAJARAN DI POLITEKNIK PENERBANGAN SURABAYA’, Jurnal Politeknik Penerbangan Surabaya - SEMINAR NASIONAL INOVASI TEKNOLOGI PENERBANGAN (SNITP), pp. 1–9.

Fegi Nisrina, S. et al. (2022) ‘Sterilization Container Using UV-C’, Indonesian Journal of Global Health Research, 4(4). Available at: https://doi.org/10.37287/ijghr.v4i4.1120.

Harianto, B., Hidayat, A. and Hulu, F.N. (2021) ‘ANALISIS PENGGUNAAN SENSOR MAX30100 PADA SISTEM PENDETEKSI DETAK JANTUNG BERBASIS IoT BLYNK’, Seminar Nasional Teknologi, 2021(SemanTECH), pp. 238–245.

I Putu Widi Ardinata 06 Kadek Agus Hari Pratama 26 (2020) ‘Sensor Tekanan Pada Alat Kesehatab’, Politeknik Negeri Bali [Preprint], (December).

Ketut, I. et al. (2018) ‘SISTEM MONITORING DETAK JANTUNG DAN LOKASI PASIEN’, Jurnal Pendidikan Teknologi dan Kejuruan, 15(1), p. 124. Available at: https://ejournal.undiksha.ac.id/index.php/JPTK/issue/view/780.

Khoirunnisa Sofia (2018) ‘Perancangan dan realiasai sistem pemantauan denyut nadi nirkable dengan transmisi zigbee’, pp. 9–30. Available at: https://kbbi.web.id/efektif,.

Muhammad Abdun Syakur (2022) ‘RANCANG BANGUN ALAT PENGUKUR DAN MONITORING TEKANAN DARAH BERBASIS INTERNET OF THINGS (IOT)’, DEPARTEMEN TEKNIK ELEKTRO FAKULTAS TEKNIK UNIVERSITAS HASANUDDIN GOWA, 33(1), pp. 1–12.

Rizki, N. (2021) PENGEMBANGAN ALAT PERAGA INSTALASI LISTRIK 1 PHASE MENGGUNAKAN SAKLAR TUKAR DAN SAKLAR SILANG PADA RUMAH 2 LANTAI. Banda Aceh: Universitas Islam Negeri Ar-Raniry Banda Aceh.

Roushul, M.I. (2022) ‘Rancang Bangun Monitoring Detak Jantung Pada Atlet Olahraga Futsal Berbasis Web Server’, Jurnal Ilmu Komputer dan Science, 1(7), pp. 979–985. Available at: https://journal.mediapublikasi.id/index.php/oktal.

Sholihudin Dwi Prihatono Tanjung (2017) ‘Tensimeter Digital Berbasis Arduino Dengan Transfer Data Berbasis Android Melalui Bluetooth’, Fakultas Teknik, Program Studi Teknik Elektro, Universitas Muhammadiyah Surakarta, p. 17.

Subagyo, L.A. and Suprianto, B. (2017) ‘Sistem Monitoring Arus Tidak Seimbang 3 Fasa Berbasis Arduino Uno’, Jurnal Teknik Elektro, 6(3), pp. 213–221.

Supegina, F. and Elektro, T. (2017) ‘RANCANG BANGUN IOT TEMPERATURE CONTROLLER UNTUK ENCLOSURE BTS BERBASIS MICROCONTROLLER WEMOS DAN ANDROID ISSN : 2086 ‐ 9479’, Jurnal Teknologi Elektro, Universitas Mercu Buana ISSN:, 8(2), pp. 145–150.

Tatilu, A.E., Sompie, S. and Wuwung, J.O. (2022) ‘Perancangan Alat Monitoring Detak Jantung Dan Saturasi Oksigen Berbasis Iot Menggunakan Platform Blynk’, Jurusan Teknik Elektro,Universitas Sam RatulangiManado, pp. 1–14.




DOI: https://doi.org/10.33666/jitk.v15i1.600

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

  
 Published by : Widya Husada Semarang University | ISSN : 2086-8510 (Print) | ISSN : 2655-5875 (Online)
  

INDEXED BY
 
MAP LOCATION